Link ends, Brackets, Tabs and more.

by **Dave** » Tue Nov 07, 2006 7:34 pm

Rear shackle hangers $20 pair
weld your own or welded. off set or centered. These take o/d bushings of 1.5'' We carry these at $10 for 4 bushings.

by **Dave** » Wed Nov 08, 2006 11:15 am

These are made for Chevy rear spring install for your Toyota. Sloped,Chevy width 3" and Chevy bolt hole 9/16.$20 pair

We have these in 2.75'' width as well for Toyota width springs (fits other name brand spings too) Takes 1.5'' bushings too.$20 a pair

by **Dave** » Wed Nov 08, 2006 11:17 am

Long spring perch, 3 hole. Helps prevent spring wrap. $20 pair

by **Dave** » Sat Aug 25, 2007 11:36 am

Rear shock mount/relocate kit $60.00 ea

by **Dave** » Mon Aug 27, 2007 9:50 am

Flat tabs $2.00 ea
Curved $2.00 ea

by **MT4Runner** » Fri Aug 31, 2007 2:49 pm

Dave, do you have front (through-frame) shackle tubes?
Poly bushings?

by **Dave** » Fri Aug 31, 2007 4:36 pm

we have the small factory size and we have the large 1 1/2 id also..

by **Dave** » Wed Nov 28, 2007 12:28 pm

New ! no death wobble front shackles for Toyota. Two sizes 5'' and 6'' eye to eye length. Comes with all the hardware and two bushings for the frame.
$75 pair

by **Dave** » Sat Jul 05, 2008 1:08 pm

Leaf spring hanger inset. Cut your frame and weld in these hangers to lower your rig. Up to 5'' higher in the frame than hangers welded to the bottom. For about 2.5'' lower. $30 a pair