BRAKES

by **Dave** » Sat Jan 14, 2006 2:02 pm

NEW VENTED ROTOR FOR STRAIGHT AXLE $25.00 EA
used ifs calipers $50 pair
Front brake kit for putting vented rotors on a straight axle. $165.
Includes: rem front calipers, 2 new vented rotors and a set of new pads. no core charge.

New front wheel bearings, Timken/Koyo $32.50 ea side.
Knuckle rebuild kit $75 w/wheel bearings $145

by **Dave** » Sat Jun 30, 2007 1:16 pm

Rem front ifs calipers 86-88 $39.99 ea exchange
Rem front ifs calipers 89-95 $49.99 ea (v-6 style) exchange

by **Dave** » Fri Sep 21, 2007 2:38 pm

Rear disc brake kit: This kit includes 2 new rotors, 2 rem brake calipers, New brake pads, Hardware, and caliper brackets. $449

No brake line mods required

1'' rear wheel spacer may be required to clear your rims, Depends on rim off set and style. 1'' wheel spacer $75 pair. Grinding of the lug studs required with the 1'' wheel spacers (only a thread or two so that the studs dont hit the rim mounting surface) front ifs wheel studs work great they are just a little shorter.

large bore brake master cyl is a great upgrade. New brake master cyl $89 with baffles for consistent fluid to the calipers. No matter the angle.

by **MT4Runner** » Tue Sep 25, 2007 7:47 am

Darn it, Dave, you just have too good of stuff at too good of prices.

Please add (2) vented rotors to my running order.

by **tmougeotte** » Tue Jan 01, 2008 11:30 am

Are you selling the upgrade master cyl. yet?

by **Dave** » Wed Jan 02, 2008 1:49 pm

New brake master cyl..life time replacement warranty. 1'' bore $89
shipping not included

by **tmougeotte** » Thu Jan 03, 2008 12:41 pm

This setup will work with my rear disc convesion I hope cause once again dave your prices are unbeatable.

by **Dave** » Thu Jan 03, 2008 1:04 pm

It will work great..I have it on mine...

by **Dave** » Fri Feb 29, 2008 8:36 pm

New chromoly axles w/new bearings installed ready for disc brakes.$499 pair
Disc brake kit w/chromoly axles $949

by **Dave** » Sat Mar 01, 2008 1:38 pm

New adjustable brake proportion valve set up $99.99 only requires 3 holes to be drilled and bleed the brakes. Front brake line 3 way gets bypassed and goes straight to the right front caliper now.
For drum brakes with out the pressure valve $75.

by **locktup** » Sat Mar 01, 2008 1:40 pm

Looks good as always Dave.

Jason

by **splasher** » Sat Mar 01, 2008 3:59 pm

^^^^^This guy builds some awesome stuff!

by **Ol' Dog 79** » Wed Aug 13, 2008 12:10 pm

Dave..I just installed my new proportioning valve..QUICK & EASY..This set-up is real CLEAN..Plus I got rid of OLD LEAKY stock unit..Thanx Dave,once again BIG HELP..Rich