'85-'95 22R AND 22RE re-manufactured long blocks come with a rebuilt head. '79-'84 22R and 20R re-manufactured long blocks come with a rebuilt head.
- **2 YR 24K MILE CONDITIONAL WARRANTY. **
- Holds 4.25-4.5 quarts of oil. More or less, you may have the wrong dip stick and/or tube.
- At 500 miles, change oil/filter, adjust intake valves to .008 and exhaust valves to .010 .
- NOTE: 20R orders will receive a 22R engine block. Other than displacement, they are identical blocks.
- Long blocks DO NOT include induction. Manifolds, plenums, injectors, throttle bodies, etc.
- Cores returned with oil/oil filter in the core will have $20 deducted from your core charge. Please drain your oil and remove your oil filter before returning your core.
- Core Charge $350
- Thank you
Engine re-manufactured process:
- Block is bored and torque plate honed.
- Block surface is decked.
- New rear main seal and housing installed.
- New brass freeze plugs are installed.
- All threads are tap chased and cleaned.
- Crankshaft is reground (.25 or .50mm) and micro-polished
- Connecting rod big and small ends are re sized.
- NEW pistons, pins and pin bushings (sized to fit)
- New ITM chrome rings are gaped and installed
- New ITM rod bearings and main bearings
- Rebuilt cyl head.
- NEW timing cover installed.
- Front balancer installed.
- Valves are adjusted and eng is shipped at TDC.
- Intake and exhaust valves get a 4 angle valve job.
- Exhaust valve seats are fully radiused.
- New valve springs.
- New ITM camshaft
- ITM full gasket set.
- New ITM steel guide timing chain set.
- New ITM oil pump.
- Valve cover baffle removed for cleaning and re installed.
- Cleaned and painted oil pan. Oil pan and pick up tube are installed.
|Manufacturer||Davez Off Road Performance|