Your one-stop shop for Toyota parts!

Differential

Items 1 to 6 of 44 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Solid Pinion Spacer

    Solid Pinion Spacer Toyota

    $20.00

    Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer to set up but worth it.

    Learn More
  2. diff stud elim davez

    Differential Stud Eliminator Kit Toyota

    $25.00

    When you come home after a trail ride do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do you have to drill and tap the studs out and replace the studs. Davez Off Road differential stud eliminator kit replaces the studs with Allen head bolts . Kit includes 10 high strength studs, locking nuts and gasket. New differential stud kit. 10 allen headed bolts to replace the studs in the housing so they wont pull out. 10 locking nuts that have built in locking washer. With the correct size head (12 mm) not some dumb 13 mm that others use. Includes a new third member gasket. Min. Tensile Strength 150,800 psi, Meets/Exceeds ISO 7380


    $25. 

    Learn More
  3. High pinion oil slinger

    High Pinion Oil Slinger

    $11.00

    High pinion oil slinger

    Learn More
  4. 3rd with locker

    Assembled Third Members with Lockers (Rebuilt) TOYOTA

    $450.00

    Built by Dave'z Off Road Performance in house, our quality 3rd members will give you the piece of mind that your gears were assembled right! Our assembled units require you to send us your old unit to avoid the core charge. These 3rd members are built with Lockers. Core charge is refundable by sending your old 3rd member to us. With the the thicker mounting flange of the High pinion housing a differential stud eliminator kit may be required to install.

    Note: Factory 4.88 V6 3rds cannot be accepeted for core.

    We use only the highest quality of Gears, KOYO and Timken bearings and Pinion seal.

    Learn More
  5. Assembled Third Members with Lockers (New)

    ALL NEW Assembled Third Members with Lockers TOYOTA

    $540.00

    Built by Dave'z Off Road Performance in house, our quality 3rd members will give you the piece of mind that your gears were assembled right !

    We use only the highest quality of Gears,  KOYO and Timken bearings and Pinion seal. With the the thicker mounting flange of the High pinion housing a differential stud eliminator kit may be required to install.

    Learn More
  6. U.S.A. Gears for Toyota

    U.S.A. Gears for Toyota

    $149.00

    USA Standard Ring & Pinion gear set for Toyota. USA Standard Gear offers a lower cost alternative to other manufacturers when price must be kept low. USA Standard Gears are not recommended for quiet running vehicles. USA Standard Gear offers a standard one year warranty against defects on their ring & pinion sets.

    29 Spline pinion now available for most ratios.

    Learn More

Items 1 to 6 of 44 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction