Your one-stop shop for Toyota parts!

Steering

Items 1 to 6 of 48 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. Trunnion Bearing

    Trunnion Bearing HD for Toyota Straight Axle

    $25.00

    New Trunnion bearings with bigger than stock needle bearings. Fits 1979-1985 mini truck axle. HD bearing lasts much longer than stock bearing. $25 ea

    • Includes matching Race.
    Learn More
  2. Trunnion Bearing Eliminator Kit

    Trunnion Bearing Eliminator Kit Toyota

    $279.00

    Anyone who wheels hard, rock crawls, or rock races has experienced blown up trunnion bearings, no matter what size bearings they are using, the bearing is always the point of failure. The Trunnion Bearing Eliminator Kit totally eliminates the bearings and replaces it with a solid king pin style pin that sits in a hardened bushing. The pin and bushing are made out of a material that is considered bearing quality because of its high carbon content, which gives it extreme hardness. To make sure these pins provide you with smooth steering we have added zerk grease fittings and machined the pins with grease passages and grooves so that they can easily be lubricated without any dis assembly of the steering knuckle. The Trunnion Bearing Eliminator Kit can be installed in a matter of hours and does not require you sending us your steering arms to be machined. You simply press out the pins in your 4 or 6 stud steering arms and press in the provided Trunnion Bearing Eliminator pins. The bottom pins have been pre installed in the bottom caps and simply install after the lower races have been installed. Since you will need to disassemble your knuckle assembly to complete this install a full knuckle service kit is provided so that you can replace all seals, gaskets, and shims. Note: Due to various machining tolerances in the current steering arms on the market, some slight reaming may be required. Not to be used with stock (push pull) steering.

    Learn More
  3. Steering Stabilizer Kit

    Steering Stabilizer Kit

    $80.00

    To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. We offer a stabilizer kit that attaches to the tie rod and to the top of the front axle. Eight inch stroke. Learn More
  4. Tie Rod

    Tie Rod/Drag Link

    $0.00

    Our heavy duty tie rods. Made from .250" wall DOM 1.25" tubing. Precision tapped. Left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish. Fits 79-95 Pickup/4Runner with crossover steering. When installing a wider Front Axle Housing and using a hi steer kit, a longer drag link and tie rod will be required to compensate for the axle housing being 3" longer then a stock housing. If you already have a hi steer kit you can simply purchase the longer drag link and tie rod, but if you are buying the wider Front Axle Housing and the wider High Steer Kit at the same time you can purchase them altogether on the high steer kits page.

    Learn More
  5. IFS Steering Boxes

    IFS Steering Boxes

    $299.00

    High quality remanufactured IFS boxes for your crossover steering. We carry both newer and older styles. For crossover steering on 79-85 trucks we recommend the early style box but you can also use the late style if you wish. Early style (left in photo) fits 86-88 Pickup and 86-89 4Runners. Late style box (right in photo) fits 89-95 Pickup and 90-95 4Runners. All boxes are completely rebuilt with new seals and bearings. Each unit is tested before shipping. Learn More
  6. FJ60/62 Steering Boxes

    FJ60/62 Steering Boxes

    $480.00

    Rebuilt FJ60/62 steering boxes. These steering boxes feature reverse cut internal gears. The pitman arm swings in front of the steering box instead of behind like the IFS style shown above. If you're moving your front axle all the way forward with links and don't want a steering box and frame hanging way out in front then consider using this box as it can be mounted behind the drag link instead of in front of it. This steering box has four mounting holes and will require custom mounting if you are using it on a Pickup/4Runner or Samurai. Sector shaft and input shafts have the same splines as IFS boxes. All boxes are completely rebuilt with new seals and bearings. No core return needed. Each unit is tested before shipping. $480

    Learn More

Items 1 to 6 of 48 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction