Home /
Drivetrain /
Transfer Case /
Complete /
Toyota Dual Transfer Cases RF1A with 4.7

Toyota Dual Transfer Cases RF1A with 4.7

Quick Overview

Dual transfer cases is feature a 4.70 low range gear set in the rear and a stock 2.28 gear set in the front. Each case is carefully assembled and inspected. Stock CV front and non CV rear flanges are installed. Triple drilled flanges are available. Available with 21 or 23 spline input gear on the front reduction section. Rear reduction section is equipped with 23 spline input gear and coupler. Floorboard and drive shaft modifications are required for dual transfer case installation. Prices below include a $450 core. Please see core details listed below. Two cores are required for full $500 core refund. One core return will be credited for the rear case at $300. The second core will be for the crawl box and a $200 core will be refunded.

*Choose Year/Trans being used

*Core Charge, one T case and one crawl box

*Please set up for twin stick or triple

*Choose Adapter Brand

*Choose 4.70 Gear Brand

Add Triple Drilled Flanges

Triple Drilled Flanges Front and Rear +$50.00

Add new drain/fill plug with washer

new drain/fill plug +$15.00

HD Reduction housing

* Required Fields

$1,500.00

Qty:

Details

Dual Transfer Cases

Core Charges: There is a $500 core charge on dual transfer case units. Upon returning your used core cases, you will be issued a company check for the core amount after the unit is inspected. Dissembled cores are not acceptable. Damaged gears and bearings are acceptable. Damaged housings sections are not acceptable. Cores should be complete, assembled and in rebuildable condition. Please include a copy of your invoice with core. Customer is responsible for shipping costs of core return. We can adjust core charge for issues the cores may have. You can now add one or both reduction housings to be upgarded HD housing

dual case davez AA
HD houisng. Super strong!