Your one-stop shop for Toyota parts!

Dave'z Flex Toyota Front Leaf Springs

Be the first to review this product

Quick Overview

If you have been trying to find the perfect front leaf spring for your wheeler or daily driver, well search no more. We have been mixing and building leaf packs for years trying to make a spring we really like. We now have a perfect spring that we have been using for 10+ years. 225lbs per inch spring rate is working great. With a total length of 47.5'' and a center pin to front eye measurement of 23.5'' puts the front axle as far forward as possible with still keeping your axle level for steering and alignment. With two types of lift springs we think we have you covered. 35'' tire and up (36'' and up may require fender trimming and/or a body lift) these springs will flex like crazy yet keep your vehicle from bottoming out or feel like its out of control. The other spring we have is 35'' tire or smaller. Same spring just not as much lift. Made right here in the U.S.A using U.S steel. These springs need 44.5'' of mounting room. Front spring mount eye to frame tube center needs to be 44.5''.



Toyota Front Lift Springs

More Views

  • Toyota Front Lift Springs
  • Toyota Front Lift Springs
  • Spring mounting pic


Toyota Front Lift Springs by Dave'z Off Road Performance.

When installing :center pin hole on passenger side perch needs to be drilled ''

1.Full military front wrap.

2. 3/8'' large center pin (stronger than most)

3. 2.5''  wide for longer lasting.

4. Includes 8 bushings.

5. Sold in pairs

Total inches in lift are calculated with a 1'' drop spring hanger and 5'' length shackles. These springs require the installation of a front spring hanger. Upon first installation vehicle may sit up to 1'' higher until springs break in.

Additional Information

Manufacturer Davez Off Road Performance

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.